Laboratory 3 Aim: To design, simulate
(using XILINX) and implement a 4-bit multiplier using three 4-bit
parallel adders and AND gates.
Material needed: Protoboard, Logic template, Three 7483 4-bit
parallel adders, AND gates, DIP switches, a set of resistors (0.25W,
1k ohms and 0.25W, 330 ohms), LED's and wires for Protoboard.
Problem: To construct a circuit that takes two 4-bit numbers
and produces their product, which is an 8-bit result.
Prelab:
-
Design the circuit and draw its block
diagram.
-
Draw a chip level schematic diagram.
Demo:
-
Derive inputs to the circuits using DIP switches
and the outputs using LED's.
-
Debug your circuit and demonstrate the operation.
|